OVERBOOST TUNING
23-11-07, 04:20 AM
SORRY FOLKS gb CLOSED!
Christmas special! From now till the 25th December, our cold air intake for the 2.0T FSI engine is going on a group buy special price.
Minimum 5 orders required.
$500 shipping and labour included in price.
Please put your name below and email obt_solutions@hotmail.com for the group buy.
http://www.vf-accessories.com/images/intake_vw_header.gif
http://www.vf-accessories.com/images/topheader_20tintake.gif The VF-Engineering big turbo kits took countless hours of R&D and testing. The induction pipework, especially the air intake design was critical to achieve optimal driveability under part throttle, full throttle, and deceleration. To take advantage of the work performed, VF engineers chose to create a "short-ram" cold air intake for the stock turbo setup as a separate product.
Designed to mount within 30 minutes, this bolt on air intake does not require any permanent modifications (trimming your engine cover as shown in the images is optional). This air intake is designed to improve throttle response, power, and torque when used in conjunction with aftermarket ECU software and/or exhaust system.
Engineered utilizing state of the art CAD CAM 3D modeling, CNC machining and computer controlled Superflow air flow testing. This system is constructed from a single piece (no weld joints) of mandrel bent 18g steel tube with integrated Mass AirFlow sensor (MAF) boss and solid cam cover mounting boss. VF uses K&N air filers for all its induction filter systems including supercharger and turbocharger systems. The intake kit includes an additional MAF heat shield and air filter heat shield with rubber lip to form a seal with the hood. As usual you can expect a clean simple fit from this classic VF-Engineering .
http://www.vf-accessories.com/images/intakevw.jpg
Volkswagen/Audi Applications:
Price
Golf Mk5 2005>up 2.0T GTI
$500Jetta Mk5 2005>up 2.0T GLI
$500Eos 2.0T
$500Audi A3 2.0T
tbaAudi TT 2.0T
tba
Kit features:
HP Gain: 10-15 (subject to conditions)
TQ Gain: 5-10 (subject to conditions)
▪ Single piece mandrel bent 18g steel
▪ Integrated billet MAF flange
▪ Laser cut MAF heat shield
▪ Laser cut Air filter heat shield
▪ K&N induction filter
▪ Installs in the factory location
▪ Utilizes factory ram air scoop for increased air flow and efficiency
http://www.vf-accessories.com/images/icons/pdficon.gifFitting Overview (http://www.vf-accessories.com/pdfs/20T-SR-Intake.pdf)http://www.vf-accessories.com/images/cube/intake/01.jpghttp://www.vf-accessories.com/images/cube/intake/imagecube-intake.gif
Every aspect of this kit has been fully engineered for high quality fitment and highly demanding performance and expectation. VF's in-house horizontal, turning and milling CNC's and plastic molding plant, GIAC's industry reputation and track record, and Garrett's reliability have been fully exploited to create a product with internationally un-rivaled material technology, quality, and performance.
1.
2.
3.
4.
5.
Christmas special! From now till the 25th December, our cold air intake for the 2.0T FSI engine is going on a group buy special price.
Minimum 5 orders required.
$500 shipping and labour included in price.
Please put your name below and email obt_solutions@hotmail.com for the group buy.
http://www.vf-accessories.com/images/intake_vw_header.gif
http://www.vf-accessories.com/images/topheader_20tintake.gif The VF-Engineering big turbo kits took countless hours of R&D and testing. The induction pipework, especially the air intake design was critical to achieve optimal driveability under part throttle, full throttle, and deceleration. To take advantage of the work performed, VF engineers chose to create a "short-ram" cold air intake for the stock turbo setup as a separate product.
Designed to mount within 30 minutes, this bolt on air intake does not require any permanent modifications (trimming your engine cover as shown in the images is optional). This air intake is designed to improve throttle response, power, and torque when used in conjunction with aftermarket ECU software and/or exhaust system.
Engineered utilizing state of the art CAD CAM 3D modeling, CNC machining and computer controlled Superflow air flow testing. This system is constructed from a single piece (no weld joints) of mandrel bent 18g steel tube with integrated Mass AirFlow sensor (MAF) boss and solid cam cover mounting boss. VF uses K&N air filers for all its induction filter systems including supercharger and turbocharger systems. The intake kit includes an additional MAF heat shield and air filter heat shield with rubber lip to form a seal with the hood. As usual you can expect a clean simple fit from this classic VF-Engineering .
http://www.vf-accessories.com/images/intakevw.jpg
Volkswagen/Audi Applications:
Price
Golf Mk5 2005>up 2.0T GTI
$500Jetta Mk5 2005>up 2.0T GLI
$500Eos 2.0T
$500Audi A3 2.0T
tbaAudi TT 2.0T
tba
Kit features:
HP Gain: 10-15 (subject to conditions)
TQ Gain: 5-10 (subject to conditions)
▪ Single piece mandrel bent 18g steel
▪ Integrated billet MAF flange
▪ Laser cut MAF heat shield
▪ Laser cut Air filter heat shield
▪ K&N induction filter
▪ Installs in the factory location
▪ Utilizes factory ram air scoop for increased air flow and efficiency
http://www.vf-accessories.com/images/icons/pdficon.gifFitting Overview (http://www.vf-accessories.com/pdfs/20T-SR-Intake.pdf)http://www.vf-accessories.com/images/cube/intake/01.jpghttp://www.vf-accessories.com/images/cube/intake/imagecube-intake.gif
Every aspect of this kit has been fully engineered for high quality fitment and highly demanding performance and expectation. VF's in-house horizontal, turning and milling CNC's and plastic molding plant, GIAC's industry reputation and track record, and Garrett's reliability have been fully exploited to create a product with internationally un-rivaled material technology, quality, and performance.
1.
2.
3.
4.
5.